Flaps & Aileron inventory and parts inspection

Hours: 2

I’m currently still waiting for the correct Elevator ribs from the Factory before I can continue to complete the Empennage. So in the meantime I’ve moved on to get started on the Wings. First order of business is the Ailerons and Flaps, starting with doing the inventory and parts check.

First I had to find the sub assemblies for the Flaps and Ailerons in the Wings crate. After a bit of digging, I got all the bags that had to do with those two parts out and then starting laying them out to check them off the packing list.
Wing crate opened and time to dig out the parts for the Flaps and Ailerons Skins for Flaps and Ailerons present

Once I had all the bags laid out, I started to check them off the inventory checklist and got out my tools for deburring a couple of sharp edges and holes.
Bags of Flap assembly parts ready to be checked Bags of Aileron assembly ready to be checked

I confirmed that I got all the parts out of the crate and went back once to find the Aileron balance tubes. Then I started to get going on removing the protective plastic from the Flaps parts and inspecting the parts, marking each part along the way. There were a couple of sharp edges and holes, but by and large most parts were good to go.
Inspecting and labeling the Flaps ribs Done with inspecting and deburring all the parts of the Flaps

 

One thought on “Flaps & Aileron inventory and parts inspection

  1. Pingback: Flaps priming & Aileron inventory - Philip's Sling TSi Build Log

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.